Category: Exercise Equipment

Nirmal-Quadriceps Table with One Torque unit is designed with a Backrest for the effective administration of progressive resistance exercises to the Knee joints muscle groups. Both QUADRICEPS & HAMSTRINGS can be exercised without changing the position of the patient. Also useful for Shoulder and Elbow exercises.
SPECIFICATIONS:
* Torque Unit: ONE set, (for Left OR Right Leg). Resistance Arms is calibrated so that resistance can be varied from Minimum, 1/2, 3/4 & Maximum without adding weights, the unit consists two lever arms, one of which hold the Weights while the other arm with shin foam roller provides contact with the patient’s leg.
* Goniometry: A degree scale is provided on the torque unit to measure and record the range of motion from either Direction.
* Seat & Armrests: Fixed height, Foam padded Seat is fitted with adjustable Arm-rests.
* Backrest: Foam padded back can be positioned from vertically to horizontally for more exercise options.
* Stabilizing Straps: Provided with torso & thigh straps for patient safety.
* Resistance: By changing angle between the two arms, maximum or minimum resistance can be given without adding Weight.
* Weight Plates: 2 of 0.5kg each, & 5 of 1kg each. Total weight 06 kgs.
* Size: 70cm x 80cm x 135cm high.
* Finish: Frame, with Powder coated finished.
:Torque Unit & working parts with Chrome plated finish.

Ankle Exerciser for Dorsi flexion and Plantar flexion exercises and patient can exercise while sitting on chair..
Specification;
* Construction; Painted Foot-Hold with straps to hold the foot is mounted on a Stainless steel sheet bracket (14g thick S.S.Sheet).
* Resistance; System is fitted with two springs on both ends for Ankle exercises.
* Resistance can be increased further by tightening spring’s nut.
* Degree of flexion can be measured and recorded from either side.
* Base; System is mounted on a laminated wooden base.

“Specially designed unit for exercising the heel & tarsus muscle groups and patient can exercise while sitting on chair.
Specification;
* Foot-Holder: Aluminum body foot-holder, size 27cm long x 09cm wide with powder coated finish comes with two straps to hold the foot.
* Base; Unit is fitted on a laminated wooden base, size 66cm long x 15cm wide.
* Resistance; System is loaded with a heavy spring for heel/foot exercises.
* The resistance can be increased or decreased by shifting the foot holder up or down on the numbered lever ”

“arm.
* The pressing lever shaft is marked and fitted with a marker to measure and record the improvement.
* Finish; Powder coated with chrome plated working parts.”

Rowing uses virtually every major muscle group in your body. Rowers work their legs, hips and buttocks with each movement. They also use upper-body muscles, strengthening the back, shoulders and arms.
Specifications:
* Upper Frame: Bright Chrome plated tubular steel frame of 22 mm diameter tube, size 60″long x 13″wide.
* Base: Upper frame is fitted on an Angle iron steel base with powder coated finish.
* Seat; Specifically designed foam padded seat is fitted with FOUR nylon wheels that slides smoothly over the frame.
* Seat is fitted with movement guiders to avoid slippage of Seat.
* Unit comes with FIVE Springs of different tensions.
: Two high tension springs attached to the seat for resistive leg exercises.
: Three light tension springs are fitted with Rope & Two Handles for resistive Arm and Shoulder exercises.
* Resistance can be varied by removing or adding the springs.

A unique exerciser for the lower and upper extremities.
* The pedalling movement can be carried out by either Arms or Legs.
* It can be fixed and adjusted in matter of seconds to limb size and to the degree of flexion or extension.
* Chrome-plated unit with adjustable resistance is very light and easily portable and can be attached to any tubular chair.

“Ped-O-Cycle for reactivation and mobilization of the joints and for strengthening the leg muscles. Suitable for patient unable to sit on a regular exercise bicycle.
Specification:
* Construction: Tubular steel construction with 20cm dia Flywheel fitted on heavy ball-bearings.
”

“* Resistance: Fitted with Calibrated Resistance control device. and Resistance is adjustable from Zero to Maximum with nylon strap.
* Pedal Movement: Pedalling movement can be carried out in Forward or Reverse direction.
* Foot-Hold: Pedals are fitted with Foot-Hold Straps.
* Finish: Powder Coated finish.”

The Adjustable, Semi-Recumbent Cycle Ergociser provides a Biomechanical SEAT for Patients requiring Back Support & Reduced Gluteal Pressure.
* The Bike with Non-Friction Magnetic Resistance system provides smoothness, durability, and runs virtually silent.
FEATURES:
* Frame: Heavy gauge pipe sturdy frame with heavy fly wheel.
* Resistance Type: Non-friction, Magnetic resistance.
* Resistance Level: 8 levels of resistance system.
* Display: Dual colour combined display time, distance, speed, calorie, pulse, perpetual calendar and clock.
* Programs: 12 programs with recovery including manual, body fat, hrc, rpm, user setting and watt program.
* Seat & Back: Completely adjustable, comfortable seat & back offers easy access and comfort that complies with ergonomics.
* Back-Support: High Back support to reduce gluteal pressure.
* Finish: Powder coated finish.

Static Cycle Exerciser, with ruggedly built tubular steel frame, stands solidly on properly balanced base with powder coated finish. Resistance system provides smoothness, durability, and runs virtually silent.
FEATURES:
* Frame-work: Heavy gauge pipe frame with one hard rubber-tired wheel, standard chain & sprocket for bicycle drive.
* Seat & Handle: Height is adjustable as required for the patient comfort.
* Paddles: Paddles are fitted with Foot supporting straps.
* Resistance: Resistance knob with ball-bearing roller permits controlled variation in ridding efforts.
* Display: Odometer shows Speed & Kilometre done.
* Finish: Frame with powder coated finish, working parts finished with chrome plating.
* Load Capacity: Approx. 100kg.

Ruggedly built tubular steel frame stands solidly on four rubber tipped properly balanced legs.
* Provided with adjustable standard cycle seat and specially designed adjustable handle.
* Fitted with one hard rubber tired wheel and standard chain and sprocket for bicycle drive.
* Comes with chrome plated wing nut, pressure rod and ball bearing Resistance roller which permits controlled variation in ridding effort.
* Odometer shows speed and kilometer done.
* Powder Coated finish with working parts finish with chrome plating.
* Manufactured as per ISI standard.

“Ruggedly built tubular steel frame stands solidly on four rubber tipped properly balanced legs. Suitable for 8 to 14 years age group.
* Provided with adjustable standard cycle seat and specially designed adjustable handle.
* Fitted with one hard rubber tired wheel and standard chain and sprocket for bicycle drive.
* Comes with chrome plated wing nut, pressure rod and ball bearing Resistance roller which permits controlled ”

“variation in ridding effort.
* Odometer shows speed and kilometer done.
* Powder Coated finish with working parts finish with chrome plating.
* Manufactured as per ISI standard.”

A great lower body exercise, working muscles in your calves, quads, and glutes.
* Powder coated, steel rod fabricated skate, fitted with three free movement casters.
* Painted Foot-Hold with straps to hold the foot at desired angle.
* Can be used on the exercise board or floor.

Hand Skate Roller is suitable for Hand, Arm and Shoulder exercises.
* Hand Skate is steel channel’s fabricated with Powder coated finish.
* Skate is fitted with free movement wheels.
* Skate has a Gripping handle for exercising on the exercise Board or Table.

Smooth Exercise Table has a cutout to enables patient to sit close to the table, providing exercises in horizontal plane for Shoulder & Elbow.
* Top: Semi-circular laminated Top is 150cm long x 90cm wide & is mounted on an adjustable base.
* Height of the top is adjustable from 90cm to 120cm.
* Adjustable Legs are Chrome plated & fitted with PVC tips.
* Unit comes with One Hand Skate and Skate is fitted with free movement wheels.
* Skate is fitted with a Gripping handle for exercising on the exercise Table.
* Finish: Metal frame with powder coated finish.

Medium tension, elbow and shoulder, exerciser is constructed of steel wire with a spring loop in the centre, have hand grips at the ends for both hands. Finished bright chrome plated.

A Set of Five Resistive exercise bands offers a resistive treatment and exercise system with unlimited options.
* Each Roll of 15cm wide x 1.7m long band, you can design exercise programs to suit’s patient’s specific needs.
* Full Set comes in following Five Resistances.
A, Medium-Light, Red: (1.7m).
B, Medium-Heavy, Green: (1.7m).
C, Heavy, Blue: (1.7m).
D, Extra-Heavy, Purple.: (1.7m).
E, Special-Heavy, Silver.: (1.7m).

A laminated slanted board with storage shelf for Thera-Putty manipulation exercises.

Putty is Bleed proof, nontoxic, clean & non-oily, putty
“leaves no color or residue on patient’s hand & it won’t fragment, separate or stick to skin. It is designed to meet a wide range of Hand / Arm strengthening needs.
* Putty can be Squeezed, Twisted, Stretched or Pinched.
* Therapy Putty Set of Two Packs in two different resistances, each pack of 100gms.”

Solid Steel Dumbbells with “V” shape chrome plated stand for organized storage of Five pairs of dumbbells.
* Dumbbells Set: Set of 2 dumbbells of each weight: 1kg, 2kg, 3kg, 4kg, & 5kg. Total weight of the set 30kg.
* Dumbbells Stand: “V” shape chrome plated dumbbells stand with painted base.
* Stand Size: 30″ high x 18″ wide x 18″ deep.

Round, Soft, Squeezable Gel balls for therapeutic exercises of Grip & Fingers.
* Set of Six Balls in Three sizes i.e. 60mm, 45mm, 32mm diameter (Two of Each Size)
* Comes in Two Different Colours, and in Two Resistances.