Butterfly Shaped, Hydrotherapy Bath Pool is designed for permanent installations with direct connections to Hot & Cold-water supply, Overflow, and Drainage. The shape & dimensions of the tank allow various arm & leg exercises to be carried out without hitting the sides. The recessed areas at the head and sides of the bath provide good access for the therapist when monitoring & assisting the patient.
SPECIFICATIONS:
*Construction: Constructed of heavy stainless-steel sheet (2mm & 1.5mm thick), electrically Argon welded tank is shaped to Butterfly modified figure.
*Overall dimension: 266cm x 196cm x 86cm high.
*Inside dimension: Length to inset 218cm. Width upper part 183cm. Width of middle narrow part 89cm. Width of lower part 135cm. Depth is 56cm.
*Turbine: Two, Turbine Ejector-Aerator are powered by the vertically mounted 1/2 hp electric motor & mounted on a spring-loaded turbine elevator for height adjustment.
*Turbine Carriages.: TWO carriages fitted with ball bearings for easy movement of Turbines around the tank.
*Power Supply: 220 V AC.
*Accessories: One Digital Thermometer, 2 Water Inlets, Drain and Overflow Pipes with all necessary fitting.
-Adjustable Stainless Steel Head-Rest,
-Stainless Steel Body Stretcher and Sitting seat fitted with nylon cloth.
*Finish: Bright polish finish inside the tank with special paint finish from outside.
Note: A separate room or hall is required for this unit with a 220V AC power supply, Hot & Cold-water supply, and water drainage.
